Home of the original IBM PC emulator for browsers.
[PCjs Machine "ibm5170"]
Waiting for machine "ibm5170" to load....
ARCE Command Version 3.1c ------------ Feb 06, 1988 Purpose: Use ARCE to extract files from an ARC archive file. Format: ARCE [d:][path]filename.ext [filespecs...] [d:outpath] [/R] [/Q] [/P] [/T] [/Gpassword] Remarks: The drive and path names are optional. If omitted, the current drive and path name is used. The filename must be supplied. The extension defaults to ARC. All files matching the supplied filename are processed. The ARC filename may contain the * and ? wildcard characters. If no filespecs are supplied, all files are extracted. Otherwise, only those ARC members which match one of the up to 16 filespecs are extracted. The extracted files may be placed on another drive, and/or in another subdirectory by following the optional filespecs with a drive designator and/or path name. If the file being extracted already exists, you are asked whether or not you want to over-write it. You may use the | /R option to bypass this prompt. Use a Y followed by the | return key to over-write the file. Use the /Q option to suppress alarm sounds, beeps, and bells. Use the /P option to write the extracted files to the DOS standard output file. With /P, you may pipe or redirect the output. An initial line feed is added to the beginning of the output file. Use the /T option to test the archive's integrity. No files will be extracted. If the file was encrypted, use the /G option to supply the same password as was used to create the file, e.g. /GSECRET. ARCE 3.1c, Copyright (c) 1986-88, Wayne Chin and Vernon D. Buerg. ALL RIGHTS RESERVED. Examples -------- o Extract all file from TEST.ARC onto the current drive: ARCE TEST o Extract only file with an extension of .ASM from the archive SOURCE.ARC on drive B and in subdirectory SAVE: ARCE B:\SAVE\SOURCE *.ASM o Extract all files from all ARC files in the subdirectory called TEST on drive C: ARCE C:\TEST\* o Extract all files from PROGA.ARC and place the files in subdirectory OLD on drive B: ARCE PROGA.ARC B:\OLD o Extract all files with an extension of .COM and .EXE from the archive PROGS.ARC in directory NEW\WORK on drive B, and place the them in subdirectory SAVE\TEST on drive A; replace existing file: ARCE B:\NEW\WORK\PROGS *.COM *.EXE A:\SAVE\TEST /R o Extract the file READ.ME from the archive GIZMO.ARC and display it on the console instead of writing it to a file: ARCE GIZMO READ.ME /P o Same as above, except pass the extracted READ.ME file to the LIST file viewer: ARCE GIZMO READ.ME /P | LIST /S Error Messages -------------- 'filename - premature EOF reading ' Data is missing from the archive file. The program is terminated. 'filename - unable to set file datestamp' The file datestamp is set to the current date and time, and the next archive member is processed. 'filename - WARNING: file CRC does not match!' The extracted member is left on the output disk, and the next archive member is processed. The file is probably invalid but is left on the disk for your examination. 'Invalid filespec(s)' The filespec syntax is incorrect. The filename part may be from 1 to eight characters, and may include the ? or * wildcard characters. The extension may be none to three characters, and may include wildcards. There is a maximum of 16 filespecs allowed. The program terminates. 'filename - file already exists. Overwrite it? (y/N) ' The member being extracted already exists. If you are using a data path utility, the file may not actually be in the subdirectory be used for output. Respond with the letter Y to over-write the existing file, or respond with the letter N to skip this member and continue to the next. 'Abort: Stack overflow' The member being extracted has invalid data. The program is terminated. 'filename - invalid decode tree count' The member being extracted has invalid data. The program is terminated. 'filename - new archive format 7 not yet supported' Format 7 is a special file compression method used internally by SEA, the authors of ARC. Processing continues with the next archive member. 'Unable to open archive > arcname' The specified ARC archive file was not found, or was inaccessible. The program terminates. 'CREATE failed > filename' There was insufficient directory space, or a failure accessing the output disk. The program terminates. 'Invalid archive format!' The archive file data is invalid. The program terminates. 'Incorrect DOS version' Version 2.0 or later of PC DOS must be used. The program terminates 'Not enough memory.' A minimum of 112k bytes of memory is required. The program terminates. 'I/O error reading from arcname' An incorrectable error occurred attempting to read data from the archive file. The program terminates. 'I/O error writing or disk full > filename' There was not enough disk space to write the complete archive member. The partially extracted file is scratched and the program terminates. 'No matching file(s) found' No archive files were found that matched the supplied filename specifications. The program terminates. 'filename - ERROR: invalid file codes' An error was detected while attempting to decode a crunched file. Either some data bytes are invalid, there are extra bytes, or there are bytes missing. The archive is invalid. Notices ------- ARCE (c) Copyright 1986-1988 by Wayne Chin and Vernon D. Buerg ALL RIGHTS RESERVED. ARCE is free, but it is a copyrighted work and may be distributed only pursuant to this license. Permission is hereby granted to reproduce and disseminate ARCE so long as: (1) No remuneration of any kind is received in exchange; and (2) Distribution is without ANY modification to the contents of ARCE.COM and all accompanying documentation and/or support files, including the copyright notice and this license. No copy of ARCE may be distributed without including a copy of this license. Any other use is prohibited without express, written permission in advance. Vernon D. Buerg 139 White Oak Circle Petaluma, CA 94952 CompuServe: 70007,1212 Data/BBS: 707-778-8944 For use by corporations, institutions, or for profit, contact System Enhancement Associates for licensing information. System Enhancement Associates 21 New Street Wayne, NJ 07470
Disk No: 2521 Disk Title: Personal Tarot PC-SIG Version: S1 Program Title: Personal Tarot Author Version: 1.0 Author Registration: $24.00 Special Requirements: 420K RAM, and two floppy drives or a hard drive. The Tarot is a method of divination that has been used and adapted around the world throughout history. The symbolism displayed in the cards' designs reveals the ancient wisdom and folklore of many cultures. Now you can enjoy professional-quality Tarot card readings on your computer! You ask the question; PERSONAL TAROT deals the cards, and then describes the cards and their meanings. PERSONAL TAROT is customizable. You can edit the card descriptions and add comments for truly personalized readings. PC-SIG 1030D East Duane Avenue Sunnyvale Ca. 94086 (408) 730-9291 (c) Copyright 1989-1991 PC-SIG, Inc.
╔═════════════════════════════════════════════════════════════════════════╗ ║ <<<< DISK #2521 PERSONAL TAROT >>>> ║ ╠═════════════════════════════════════════════════════════════════════════╣ ║ ║ ║ To print the instructions, type: COPY HELP.DOC PRN ║ ║ ║ ║ To install the program to a floppy type: FLOPPY ║ ║ ║ ║ ║ ╚═════════════════════════════════════════════════════════════════════════╝ (c) Copyright 1991, PC-SIG Inc.
IMPORTANT INFORMATION ABOUT THESE DISKS BEFORE YOU START: Make backup copies of your disks. (See the DISKCOPY command in your DOS manual.) Put the original disks in a safe place, and use the copies for all work. If you are upgrading from an older version of a program, make backup copies of all your old data files before you install the new version. Files with the extensions DBF, DBT, and MEM contain essential data. Files with the NTX extension are index files. Some programs also create special text files which you may want to back up. ARCHIVE FILES: Sometimes there are too many files to fit on a single floppy disk. These programs are compressed and stored in special archive files with the extension ARC or ZIP. Before you can use the program, you must extract the files from the archive. We have provided the extraction utility. If you are using a 2-floppy system, look for a file named FLOPPY.BAT or DOTWO.BAT. Start from the A> prompt, with the master disk in the A drive. Be prepared with 2 or 3 empty, formatted diskettes. Enter the appropriate command, depending on the file you found. For example, if you have FLOPPY.BAT, type FLOPPY and press <ENTER>. Follow the instruc- tions on screen, which will tell you when to insert your floppy disks into the B drive. If you are using a hard disk, be sure you have created the subdirec- tory where you want the program to be kept. Look for a program named ARCE.COM or UNZIP.EXE or PKUNZIP.EXE. Starting from the correct subdi- rectory, at the C> prompt, with the diskette in the A drive, enter the appropriate command. For example, if your archive file has the ARC extension, you should have the program ARCE.COM. Your command will look something like this: A:ARCE A:FORTUNE. (Instead of "fortune" use the actual name of the archive file.) The program will automatically un-com- press the files and place them in the current subdirectory. In some cases, you may have "self-extracting" archive files. These do not require a separate utility, but will un-compress themselves. They look like ordinary program files with the EXE extension, but can be identified by the @ symbol in the filename. To use a self-extracting archive, first log onto the drive and directory where you want to place the uncompressed files. For example, if you have a two-floppy system, you might want to place your master disk containing the archive into the A drive, and then log onto the B drive with an empty, formatted disk. If you are using a hard disk, create the subdirectory for the new files, and then log into the subdirectory, with the archive disk in the A drive. If the archive name is WAURA@.EXE, you will type A:WAURA@ and press <ENTER>. Self-extraction will occur automatically. (Note to floppy disk users: There may be more than one self-extracting archive on a single disk. You must use a separate, empty, formatted diskette for each such archive.) Note that if the disk vendor has created a self-extracting archive file, it may not have the "@" sign in the file name. In most cases the vendor will provide instructions, and/or you will see identifying messages on screen when you try to run the program. DOCUMENTATION AND INSTRUCTIONS: Most of our instruction manuals are in special program files which allow you to view the manual on screen or print it. These files may have the COM extension or the EXE extension, and usually have "DOC" somewhere in the filename. Simply enter the appropriate command. For example, if you have the program BY THE NUMBERS, the instruction manual is called NUMDOC.COM. To view the manual, type NUMDOC and press <ENTER>. You can page through the document on screen, or print it by pressing <ALT><H>. For a list of helpful commands, press <F1>. Note: If you use the ANSI.SYS driver, the screen colors of these document may not always appear correctly. Files which have the DOC or TXT extension are ASCII format files (also called DOS text files) which can be viewed or printed using DOS commands. For example, if you have a typical setup, you can print a document called CATALOG.DOC using this command: TYPE CATALOG.DOC > LPT1: To view this file on screen, you would enter: TYPE CATALOG.DOC | MORE You can also view and print this kind of file with most word proces- sors, using the format for "ASCII", "DOS text" or "Non-document" files. PROGRAM FILES: Program files can be identified by the extension EXE or COM after the file name. To run the program, simply type its name. For example, you have a program named WORKBASE.EXE, type WORKBASE and press <ENTER>. SOURCE CODE: Registered versions of a few programs come with source code. You do not need the source code just to run the program; you can delete it from the disk to make more room. Source code files have the extensions PRG, BAS, and OBJ. DATA FILES: Some programs create data files, with the extensions DBF, DBT, NTX and MEM. These are important and should be backed up regularly. Some programs also create special text files which you may also want to back up. HARD DISK OR FLOPPY: Your programs will run much faster on a hard disk than they do on a floppy. Also, some programs build large data files which may grow as you use the program and eventually fill a floppy disk. We recommend using a hard disk. POETRY GENERATOR requires a hard disk, and MAILLIST and WORKBASE are much easier to use on a hard disk. Any program which uses data files (those with the DBF and DBT exten- sions) is best when used on a hard disk. NEW VERSIONS: Sometimes a new version of a program will ask your per- mission to update your data files. Do not answer "yes" unless you have already made a backup copy of your data. Don't copy the backed-up data back into the directory after the files have been updated. CREATIVITY PACKAGE: Disk #1 contains the complete text of Thomas A. Easton's book, "Think Thunder! And Unleash Your Creativity". To read it, use the command READIT, or you can read each chapter separately by typing the chapter name (see the disk for file name). Disk #2 contains the program THUNDER THOUGHT, and disk #3 contains VERSIFIER. POETRY GENERATOR: The registered version is distributed on two disks, containing different archive files. All the files from both disks are needed for the program to run correctly. BONUS DISKS: We are not the authors of these programs. Please direct shareware payments and technical questions about a program to the author whose name appears in the documentation. If you have trouble reaching an author, we will do what we can to help you. All programs have been tested. Because hardware and software configurations vary, we cannot guarantee satisfactory results. We do not warrant these programs in any way. To report a problem, please write a letter describing the problem in detail, including information about your system. We cannot debug these programs over the phone. Thank you for your interest in our UNUSUAL SOFTWARE. We support our registered users. If you have questions, comments, complaints or compliments, please write to us. Have fun! BAD DISK? It seems that in hot weather we are more likely to get complaints about "bad" or unreadable disks. Floppy disks are susceptible to heat, moisture and magnetism. A disk that sits all day in a hot mailbox or truck where temperatures exceed 100 degrees is likely to be damaged. Disks which have been exposed to magnetism in their travels may contain unreadable files. Before assuming that a disk is bad, try reading it on a different computer, if possible. It may be that your drive heads are dirty or slightly misaligned. Suspect this if you frequently get disk error mes- sages with many different disks. An inexpensive head cleaning kit may help solve your problem. Sometimes the round disk gets trapped inside its square casing and generates an error message because it can't rotate freely. Remove the disk from the drive and tap each of the four sides sharply on the sur- face of your desk. This may loosen the disk. Try reading the disk again. Norton Utilities and Mace Utilities both have features that can some- times revive unreadable disks. We have had good results with Norton. Any serious computer user should have one of these utility packages. In any case, if we have sent you an unreadable disk, we will be happy to exchange it for a fresh copy of the same program. ERROR MESSAGES It may happen that when you run a program, you will get an error mes- sage something like this: Open File Error DESC.NTX (4) The "4" is DOS's cryptic way of telling you that the program has tried to open more files than DOS can handle at once. To solve this problem, you need to check the CONFIG.SYS file in your root directory. This file should contain the following lines: files=20 buffers=20 If the numbers are smaller then 20, or if these lines are missing from the file, you will need to edit it. If you don't have a CONFIG.SYS file, you will need to create one. (Note that some systems and networks may require numbers larger then 20. Check your system user's manual.) CONFIG.SYS must be a pure ASCII file. You can edit or create this file using Edlin or any pure ASCII text editor. Most word processors allow you to save files in ASCII format. (This may be referred to as a DOS Text File. WordStar may call it "non-document".) Remember, the file must be in ASCII format and must be in the root directory on your C drive. If you boot with a DOS diskette in the A drive, the CONFIG.SYS file must be in the root directory of the disk you use to boot. When you have corrected the CONFIG.SYS file, reboot your system and try running the program again. In case you are confused and can't create a CONFIG.SYS file for your- self, we distribute a free program called DOCONFIG which will edit or create your CONFIG.SYS file as needed. If you would like a copy of this program, please send a double-sided, double-density, 5 1/4" diskette in a sturdy, reusable mailer with three first-class stamps. If you don't want to bother with the disk and mailer, send $5.00 instead. (Sorry, DOCONFIG is not available on 3 1/4" disks.) "0" ERROR On rare occasions, you may see an error message similar to this one: Open File Error NUMBERS.NTX (0) The number 0 and the NTX extension in the file name indicate that the problem is a corrupted or damaged index file. Most of our programs will automatically recreate missing index files. So, simply delete the file in question (make sure you delete only files with the NTX extension) and try running the program again. Some programs also have a reindexing choice on the menu which allows you to re-create the indexes whenever you like. OTHER ERRORS There are many possible reasons why a program might occasionally pro- duce an error message. In most cases, errors are not serious, and they usually have a simple solution. If you don't understand what the error message means, or if you don't know how to solve the problem, we can help you. Make an exact, complete copy of the error message (a print-screen is best). As soon as the error happens, write down what you were doing (or trying to do) at the time. Have you been able to do the same thing in the past without getting an error? Have you seen a similar error before? Make a note of any keys you may have pressed just before the error oc- curred. Do you think you know what may have caused the error? Could it be related to changes in your system, a new version of the program, or something unusual you did? Send us the information, and we will let you know what needs to be done to correct or avoid the error. REGISTERED USERS: We support our registered users, and are happy to answer your questions and help solve any difficulties you may have. The best way to get help is to write to us, including full details of the problem or question, and copies of error messages or screens, if available. If your problem is urgent, and you are a registered user, you are welcome to call us during business hours. Our phone number is listed on the printed materials provided to registered users. (We work from 9:00 AM to 7:00 PM Pacific Daylight Time, Monday through Friday, and Noon to 4:00 PM Saturday. If you're in a different time zone, please be careful about calling too early in the morning!) Remember that we often do outside consulting work, so you may reach the answering machine. If that happens, please leave phone numbers for both day and evening, and let us know what days and hours we may call you back. R.K. West Consulting Attn: Rosemary West P.O. Box 8059 Mission Hills, CA 91346, U.S.A. If for any reason are unable to reach us at the above address, please contact Rosemary West through the Association of Shareware Professionals.
Dear Shareware Vendor: The software distributed on this disk is copyrighted material and is subject to certain restrictions on copying and distribution. For puposes of this document, any person or organization distributing software on disk or through any other medium is considered a disk vendor, whether or not fees are charged, and whether or not the organization is non-profit. Vendors who distribute software without charging any fee of any kind may distribute this software, provided they comply with all the terms and conditions listed in this document and/or in the accompanying software documentation. Vendors who charge a fee of any kind, whether it is a "membership" fee, "shipping and handling" charge, "copying" fee, or other type of fee, must obtain the author's permission in order to distribute this software. If you are a vendor approved by the Association of Shareware Professionals (ASP), you may proceed to distribute the software under the terms and conditions listed in this document and/or the accompanying software documentation. ASP-approved vendors must notify the author of their intention to distribute the software, and must indicate which version of the software they have. Under no circumstances may outdated versions or registered versions of this software be distributed. Vendors who are not ASP-approved must write to the author to obtain permission before distributing the software. The author reserves the right to withhold or withdraw permission to distribute from anyone at any time for any reason. You may copy and distribute the UNREGISTERED version of this software, provided: (a) You do not rename, change or omit any of the files unless you receive express permission to do so in writing from the author, (b) You understand that you may not "sell" this software, but you may charge a reasonable copying fee for providing copies on disk, (c) You do not "rent" or "lease" copies of this software, (d) You do not advertise this software as "free", "cheap" or "public domain". Vendors must comply with the standards set by the Association of Shareware Professionals (ASP). If you are unable or unwilling to comply with the terms and conditions, do not distribute this software. The following files MUST be included on all distribution copies of this program: TAROT.EXE TAROTDOC.EXE TAROT.DBF TAROT.DBT VENDOR.DOC ASP.DOC You may use "file compression" techniques in order to fit more programs on a single disk. Because this is a self-modifying file, do not use LZEXE to compress it. This program may NOT be distributed on the same disk with other mailing list programs or with any so-called "adult" or "X-rated" materials. If you indicate ASP membership in your catalog, please do so for your listing of this program. For further information about this and other software products: Rosemary West R.K. West Consulting P.O. Box 8059 Mission Hills, CA 91346, USA For information on becoming an ASP-approved vendor: Association of Shareware Professionals Vendor Certification Committee P.O. Box 5786 Bellevue, WA 98006, USA Software reviewers: If you plan to review this software for publication, please contact us first to make sure you have the most recent upgrade version of the product and that the ordering information supplied to your readers will be accurate.
Volume in drive A has no label Directory of A:\ HELP DOC 13252 6-18-90 6:41p VENDOR DOC 3429 7-07-90 1:30p TAROT ARC 232463 7-23-90 2:47p ARCE COM 7128 2-06-88 1:06p ARCE DOC 7786 1-12-89 7:51p FLOPPY BAT 257 7-07-90 1:28p ASP DOC 1583 6-20-90 5:35p CATALOG DOC 21728 7-22-90 1:35p GO BAT 28 10-04-90 5:21a GO TXT 803 10-04-90 4:29p FILE2521 TXT 1855 10-04-90 4:30p 11 file(s) 290312 bytes 26624 bytes free