Home of the original IBM PC emulator for browsers.
[PCjs Machine "ibm5170"]
Waiting for machine "ibm5170" to load....
Disk No: 2510 Disk Title: PCBreeze II PC-SIG Version: S1 Program Title: PCBreeze II Author Version: 2.1 Author Registration: $95.00 Australian Special Requirements: 384K RAM and CGA, EGA, VGA or Hercules graphics. PCBREEZE II is a sophisticated yet easy-to-use tool for designing printed circuit boards (PCB). It lets you create, view, modify, and output any one or two layer PCB of up to 300 square inches (using a 50 mil grid system). It has two text layers for each PCB layer and a common silkscreen layer. Most operations can be performed directly through the keyboard or by pop-up menus. Microsoft compatible mice are also supported. Simply specify the component pads and use the cursor keys to draw the traces. Pan and zoom to any part of the drawing. Move, copy, or delete any section of the art work. Sections can be saved to disk to create libraries and be used repeatedly. Design is simple with the use of its auto-routing facilities which allow an entire board to be routed by PCBREEZE alone, or interactively edited and autorouted to get precise control over the art work generated. Finally, the results can be output to a plotter or Postscript printer with the included plotting utility. PCBREEZE II can also produce prototype quality plots on a Epson FX/LQ or compatible printer. PC-SIG 1030D East Duane Avenue Sunnyvale Ca. 94086 (408) 730-9291 (c) Copyright 1989-1991 PC-SIG, Inc.
╔═════════════════════════════════════════════════════════════════════════╗ ║ <<<< DISK #2510 PCBBREEZE II >>>> ║ ╠═════════════════════════════════════════════════════════════════════════╣ ║ ║ ║ To start the program, type: PCBREEZE ║ ║ ║ ║ To view instructions on printing the documentation, type: README ║ ║ ║ ║ To read or print the registration form, type: READFRM ║ ║ PRINTFRM ║ ╚═════════════════════════════════════════════════════════════════════════╝ (c) Copyright 1990-1991, PC-SIG Inc.
PCBreeze II (Printed Circuit Board Artwork Editor) by KEPIC Pty Ltd Reference guide (Shareware Version 2.1) KEPIC Pty. Ltd. reserves the right to make changes in the product PCBreeze at any time and without notice. (C) Copywrite 1987-1990 KEPIC Pty Ltd PCBreeze is Copywrited. All rights reserved Worldwide. No portion of this product may be copied, photocopied, reproduced, translated or reduced to any medium or form without prior consent in writing from KEPIC Pty Ltd -------------------------------------------------------------- Contents Introduction Hardware Supported Software License Agreement Chapter 1:Before Use Backups Files on distribution disk Installation - working copies Printed Circuit Board Layout Chapter 2:Starting PCBreeze Quitting PCBreeze Chapter 3:Using PCBreeze Status line Basic editing Mouse Support Entering Commands PCBreeze II commands Chapter 4:Text & Component Overlay Chapter 5:List Autorouting Chapter 6:Plotter Output Chapter 7:Printer Output Run-time Errors Command Summary Glossary -------------------------------------------------------------- Introduction About PCBreeze II PCBreeze is a sophisticated tool for use in the design process of Printed Circuit Boards. It allows a board to be created, viewed and modified on an IBM personal computer.
Welcome to PCBreeze II Shareware Version 2.1 Copywrite 1987-1990 KEPIC Pty Ltd All Rights Reserved Worldwide PCBreeze II is an easy to use but powerful PCB (Printed Circuit Board) CAD tool. This version of PCBreeze is being distributed as "shareware" - it is not in any way free software. You may use PCBreeze II for a limited trial period. If you wish to continue using PCBreeze II you may register PCBreeze and receive the latest enhanced version, a fully printed and bound manual and user support. For more details on registering see the PCBreeze II opening screen and user documentation. By using PCBreeze II you agree to the terms and conditions set out in the software license detailed in the PCBreeze documentation (in the expanded file PCBREEZE.TXT). Full instructions on the installation and use of PCBreeze II may be found in the compressed file PCBREEZE.KEP. To expand the file into a readable form use the expansion program EXPAND.EXE. for example: > EXPAND will take the compressed document file in the current drive and directory and will create PCBREEZE.TXT in the current drive and directory. ( Note: there may not be enough room to do this on a 360k 5 1/4" disk. If this is the case then just make a copy of the disk and delete all files except PCBREEZE.KEP and EXPAND.EXE and then expand the manual). or If you had PCBREEZE.KEP in the A: drive and wanted to put PCBreeze and it's documentation in C:\PCB : A:> EXPAND C:\PCB
Volume in drive A is PCBREEZE Directory of A:\ PCBREEZE EXE 168304 9-16-90 10:23p PCBREEZE KEP 46986 9-16-90 8:43p EXPAND EXE 11678 9-14-90 10:10a HPPRINT EXE 9856 9-12-89 8:40a EPSON FNT 30480 6-07-89 7:49p EPSON FNQ 16256 8-16-89 8:06p EGAVGA BGI 5363 8-29-88 5:00a CGA BGI 6253 8-29-88 5:00a HERC BGI 6125 8-29-88 5:00a DEMO1 PCB 5224 6-08-89 10:13a DEMO2 PCB 5341 6-19-89 8:20a DEMO2 TCO 1584 6-19-89 8:20a DEMO3 PCB 5397 6-14-89 8:45p DEMO3 TCO 1488 6-14-89 8:45p NETDEMO DEV 300 1-02-87 5:33p NETDEMO NET 1110 7-19-87 10:28p ORDER FRM 1684 9-16-90 4:08p READFRM BAT 16 9-16-90 12:17p PRNTFRM BAT 18 9-16-90 12:18p README TXT 1734 9-14-90 3:25p README BAT 19 9-14-90 3:30p PC-SIG 751 9-16-90 12:10p PCBREEZE TXT 2560 12-24-90 1:20p GO BAT 28 10-04-90 5:21a GO TXT 885 10-04-90 10:04a FILE2510 TXT 2521 10-04-90 10:03a 26 file(s) 331961 bytes 15360 bytes free